Steps to Refinishing Your Hardwood Floor.

There are many benefits of investing in a hardwood floor but also, they come with many responsibilities. This is because with time they can lose their glory and therefore the need to replace or refinish them. You should conduct some inspections to define if you will replace the hardwood flooring materials or refinish them. When you want to refinish the hardwood floor, you can engage professionals but also it is simple, you can do-it-yourself. Read more below to learn on how to the furnish hardwood floor.

For you to refinish the hardwood floor, you need to collect the appropriate materials. There are a number of refinishing materials you need to have before you start the process which can include the shop vac, shop rags, sandpapers, stain application pad, furnish foam rollers, oil-based stains and so on. It is possible you don’t understand much about different refinishing materials to purchase, and that is where you can engage a professional for advice. After getting the materials, you now prepare the floor which can include removing carpet tacks, nails, and other objects.

After removing the object from the floor, you should know surgery floor using the 60-grit sandpaper and the belt sander. Also, repeat the same with different sandpapers of which you finish with the shop vac to get rid of the debris and dust.

After you have finished removing the dust in the debris, you should start water popping. Water popping is the process that is meant to get the floor wet to raise the greens. When water is used for after clearing the dust, it is helping the wood in absorbing the stains. You need to therefore so dip the rag in the water of which is use it after wants to wipe the floor.

The next step is to stain the floor used oil-based stains and the stain applicator pads. There is a procedure to follow when applying the oil-based stains because, after the first application, you should give it 24 to 48 hours to dry. Polyurethane is then applied after the oil-based stains have dried up using the foam roller of which you are advised to give at least two hours to dry.

Now after finishing the coating, it is time to buff the floor using the 220-grit screen. After you are done with buffing, you should apply the second coating using polyurethane which you repeat the same process 3-4 times. After this process is done, you discover that the floor looks brand-new. There is much to discover about hardwood floors and how to take care of them and when you want to refund issue or by yourself, it is important that you have relevant info which is readily available on the Internet.